Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B35G3 BK00564 - PA6-GF15 - BASF

Material Data Center offers the following functions for Ultramid® B35G3 BK00564:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Glass fibre reinforced injection moulding grade e.g. for internal gas pressure applications such as steering column switch, automobile mirror housings and wheels of mountain bikes.
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 6100 / 3200 MPa ISO 527
Carico unitario a rottura 126 / 67 MPa ISO 527
Deformazione a rottura 2.9 / 13.2 % ISO 527
Resistenza all'urto Charpy, +23°C 47 / 107 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 5.9 / 15 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 220 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 187 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 214 / * °C ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB / * class IEC 60695-11-10
Yellow Card disponibile sì / * - -
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Res. Alle correnti striscianti superficiali - / 550 - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 8 / * % Sim. alla ISO 62
Assorbimento d'umidità 2.6 / * % Sim. alla ISO 62
Massa volumica 1240 / - kg/m³ ISO 1183
Funzioni
Sforzi-deformazione , Ultramid® B35G3 BK00564 (Secco), PA6-GF15, BASF
Modulo secante-deformazione , Ultramid® B35G3 BK00564 (Secco), PA6-GF15, BASF
Modulo a taglio-temperatura , Ultramid® B35G3 BK00564 (Secco), PA6-GF15, BASF
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Nero
Applicazioni
Automotive
Disponibilità geografica
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 270 - 290 °C
injection molding, Melt temperature, recommended: 280 °C
injection molding, Mold temperature, range: 80 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.